UV Poxy Choose the bundle or only the 17 oz bottle

**USE DROP DOWN TO SELECT WHICH PRODUCT/SIZE YOU NEED**

*2 UV POXY PRODUCTS TO CHOOSE FROM: UV POXY BUNDLE, or a 17oz Bottle of UV Poxy ONLY.*

***DISCOUNTED STICKY 17OZ BOTTLES OF UV POXY*** SOLD AS-IS NO RETURNS OR REFUNDS. Expect these to arrive and need cleaned off before use. PRODUCT IS STILL INTACT, HEAT SEALS UNDER LIDS, just sticky outside due to other bottles exploding in case. 

**USE DROP DOWN TO SELECT WHICH PRODUCT YOU WISH TO PURCHASE**

17oz Bottle of UV POXY  

17OZ BOTTLE ONLY ITEM IS ONLY FOR THE 17 OUNCE BOTTLE OF UV POXY

UV POXY & LAMP BUNDLE

8oz bottle of UV Poxy

220 watt lamp to cure UV Poxy in 90 seconds...OR LESS!

Perfect bundle for pens, tumblers, badge reels, and other molds. Please remember only clear molds can be used with UV Poxy to ensure UV light can get completely through mold and cure properly.

Directions:

1. Remove heat seal under lid. Replace lid and unscrew cap. Tip can be cut 1/4” to help product dispense quicker and lid will still screw on.
2. Shake bottle before each use to ensure nothing settled.
3. Dispense product in thin layers. 
4. Piece can be placed under lamp for 10 secs X 3, then 30 secs. if still tacky. Make sure to check for tackiness after piece has cooled from being under lamp.

Black bottom of lamp can be removed and replaced as needed for bigger pieces to fit under.

Do not drop lamp as this can break it and we are not responsible for broken lamps. Each lamp is tested individually before we pack and ship bundles.

We do not recommended using other UV lamps or lights with our product. We have only tested UV Poxy with our lamp. We cannot guarantee UV Poxy to cure properly with other lamps or lights. We cannot troubleshoot or offer help in these scenarios. We are launching our UV Poxy with our lamp first to ensure everyone gets our lamp. We will have bigger bottles of the UV Poxy only for sale to purchase separately. Lamp and 8oz bottle of UV Poxy will only be available in bundle.

PLEASE READ INSTRUCTIONS PRINTED ON LABEL OF EACH BOTTLE FOR MORE INFORMATION 

Shake bottle before use (this should be done with any product as ingredients and chemicals can settle between use)

Thin coats

With Tumblerpoxy's UV Lamp we recommend place item under lamp using the low heat mode 99 secs first, let item cool, if still tacky after cooling, place item under lamp for 60 secs., let cool again and item will be tack free and shiny!

FREE SHIPPING IN THE USA INCLUDING HAWAII AND PUERTO RICO

CAN SHIP TO CANADA, ETC. BUYER PAYS SHIPPING

 ***NO REFUNDS AND NO RETURNS. Please refer to our return policy located at the bottom of this website. LIMITED 30 day warranty on UV Lamp. Warranty does not include lamp being dropped or any abuse by customer.

 Caution: Eye and Skin irritant. Do not swallow. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. Use proper PPE at all times. KEEP OUT OF REACH OF CHILDREN.